{"title":"Newmar Power DC to DC Converters","description":"Created by FishTech Builder","products":[{"product_id":"newmar-12-12-35i-dc-converter-12-12-35i","title":"Newmar 12-12-35I DC Converter [12-12-35I]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12-12-35I DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis isolated series provides voltage conversion as well as input\/output isolation, allowing the use of negative ground gear in positive or floating ground battery systems, or vice versa. \u003c\/p\u003e\u003cp\u003eUsing an isolated converter as a voltage stabilizer on 12- or 24-volt systems can solve conducted noise and interference problems on sensitive DC-powered communication, navigation systems, and DC microprocessor-based devices.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWide range of input voltage\u003c\/li\u003e\n\u003cli\u003ePrecise output voltage regulation\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eInput fuse\/output fuse\u003c\/li\u003e\n\u003cli\u003eTotal input\/output isolation, pos. or neg. ground\u003c\/li\u003e\n\u003cli\u003eCurrent-limiting, short-circuit-proof output\u003c\/li\u003e\n\u003cli\u003eAutomatic resetting of the thermal shutdown\u003c\/li\u003e\n\u003cli\u003eHigh\/low input voltage shutdown\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC board\u003c\/li\u003e\n\u003cli\u003ePower ON light\u003c\/li\u003e\n\u003cli\u003eRugged case designed for high-vibration applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 10-16\u003c\/li\u003e\n\u003cli\u003eMax Input Amps: 56\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 35\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 20\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6 x 6.8 x 16.5 inches (15.2 x 17.3 x 41.9 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lb. (5.5 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eDuty Cycle Ratings: Intermittent – 20 minutes max on time, 20% duty. current limit set at approx. 105% of the intermittent rating. Continuous – 24 hours, 100% duty\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light )\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical\u003c\/li\u003e\n\u003cli\u003eIsolation – Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003econformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.\u003c\/p\u003e\u003cp\u003eThe kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify Kit L for units that weigh 2 -15 lbs. and Kit H for units that weigh 16 – 70 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981228281,"sku":"FTD-102293","price":2164.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102293XL.jpg?v=1782536885"},{"product_id":"newmar-12-12-3i-power-stabilizer-12-12-3i","title":"Newmar 12-12-3i Power Stabilizer [12-12-3I]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12-12-3i Power Stabilizer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed sensitive electronics with proper voltage, regardless of the battery condition. This stabilizing converter provides continuous, precisely regulated output over the entire range of a battery’s usable voltage. This prevents subjecting loads to fluctuating input voltage, which can cause shutdown, diminish performance, and possibly damage sensitive circuitry.\u003c\/p\u003e\u003cp\u003eThis converter provides total input\/output isolation, virtually eliminating conducted line noise and permitting the connection of negative ground gear to positive or floating ground systems, or vice versa. It can be modified for use as a battery charger, allowing them to maintain a battery at a great distance from the primary voltage source, providing reserve power if the main source fails. The rugged anodized aluminum case is ideal for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplication Benefits Include:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperate electronics at optimal input voltage, even from nearly drained batteries\u003c\/li\u003e\n\u003cli\u003eBoost voltage to compensate for voltage drops in long wire runs from batteries\u003c\/li\u003e\n\u003cli\u003eEliminate voltage drops during momentary high current drain from batteries, as during engine start\u003c\/li\u003e\n\u003cli\u003eEliminate voltage fluctuation from charge sources\u003c\/li\u003e\n\u003cli\u003eEliminate voltage overshoot due to sudden removal of high current load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 10-16\u003c\/li\u003e\n\u003cli\u003eInput Amps: 4\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 3\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 3\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 1 lb. (.45 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 12 or 24V, nominal, see matrix\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. Current limit is set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light )\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature.\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz.\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation – Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions\/Factory Modifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger (contact factory)\u003c\/li\u003e\n\u003cli\u003eParallel\/redundant operation (contact factory)\u003c\/li\u003e\n\u003cli\u003eHigh-vibration mounting kit\u003c\/li\u003e\n\u003cli\u003eNon-standard output voltage (contact factory)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.\u003c\/p\u003e\u003cp\u003eThe kit (pictured here) replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a “super shock absorber” for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT–L for units that weigh 2–15 lbs. and Kit–H for units that weigh 16-70 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981261049,"sku":"FTD-102294","price":267.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102294XL.jpg?v=1782536885"},{"product_id":"newmar-12-12-6i-power-stabilizer-12-12-6i","title":"Newmar 12-12-6i Power Stabilizer [12-12-6I]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e12-12-6i Power Stabilizer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeed sensitive electronics with proper voltage, regardless of the battery condition. This stabilizing converter provides continuous, precisely regulated output over the entire range of a battery’s usable voltage. This prevents subjecting loads to fluctuating input voltage, which can cause shutdown, diminish performance, and possibly damage sensitive circuitry.\u003c\/p\u003e\u003cp\u003eThis converter provides total input\/output isolation, virtually eliminating conducted line noise and permitting the connection of negative ground gear to positive or floating ground systems, or vice versa. It can be modified for use as a battery charger, allowing them to maintain a battery at a great distance from the primary voltage source, providing reserve power if the main source fails. The rugged anodized aluminum case is ideal for marine applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eApplication Benefits Include:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperate electronics at optimal input voltage, even from nearly drained batteries\u003c\/li\u003e\n\u003cli\u003eBoost voltage to compensate for voltage drops in long wire runs from batteries\u003c\/li\u003e\n\u003cli\u003eEliminate voltage drops during momentary high current drain from batteries, as during engine start\u003c\/li\u003e\n\u003cli\u003eEliminate voltage fluctuation from charge sources\u003c\/li\u003e\n\u003cli\u003eEliminate voltage overshoot due to sudden removal of high current load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 10-16\u003c\/li\u003e\n\u003cli\u003eInput Amps: 8\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 6\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6.5 x 4.0 x 1.75 inches (6.8 x 10.2 x 4.5 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 2 lb. (.9 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 12 or 24V, nominal, see matrix\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. The current limit is set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light )\u003c\/li\u003e\n\u003cli\u003eOperating Temp: 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C. Thermal shutdown @ 70 degrees C Case Temperature.\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz.\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation – Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAnodized aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal-coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions\/Factory Modifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger (contact factory)\u003c\/li\u003e\n\u003cli\u003eParallel\/redundant operation (contact factory)\u003c\/li\u003e\n\u003cli\u003eHigh-vibration mounting kit\u003c\/li\u003e\n\u003cli\u003eNon-standard output voltage (contact factory)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles.\u003c\/p\u003e\u003cp\u003eThe kit (pictured here) replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a “super shock absorber” for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT–L for units that weigh 2–15 lbs. and Kit–H for units that weigh 16-70 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981293817,"sku":"FTD-102295","price":457.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102295XL.jpg?v=1782536885"},{"product_id":"newmar-24-12-3-dc-converter-24-12-3","title":"Newmar 24-12-3 DC Converter [24-12-3]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e24-12-3 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 17-32 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 17-32\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 3\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 3\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 3.5 x 3.5 x 1.75 inches (8.9 x 8.9 x 4.5 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 1 lb. (.45 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) \u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eOperation as battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981523193,"sku":"FTD-102300","price":204.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102300XL.jpg?v=1782536887"},{"product_id":"newmar-32-12-10-dc-converter-32-12-10","title":"Newmar 32-12-10 DC Converter [32-12-10]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-10 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 10\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 10\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 4 lb. (1.8 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981555961,"sku":"FTD-102302","price":584.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102302XL.jpg?v=1782536888"},{"product_id":"newmar-32-12-15-dc-converter-32-12-15","title":"Newmar 32-12-15 DC Converter [32-12-15]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-15 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 15\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 15\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 5 lb. (2.3 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981588729,"sku":"FTD-102303","price":621.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102303XL.jpg?v=1782536888"},{"product_id":"newmar-32-12-25-dc-converter-32-12-25","title":"Newmar 32-12-25 DC Converter [32-12-25]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-25 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within rating\u003c\/li\u003e\n\u003cli\u003eHeat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 25\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 20\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6.0 x 4.7 x 14.0 inches (15.2 x 11.9 x 35.6 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 7.5 lb. (3.4 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 Khz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2 minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981621497,"sku":"FTD-102304","price":868.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102304XL.jpg?v=1782536889"},{"product_id":"newmar-32-12-35-dc-converter-32-12-35","title":"Newmar 32-12-35 DC Converter [32-12-35]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-35 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter \u0026amp; Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCurrent limiting\u003c\/li\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 35\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 30\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6.0 x 4.7 x 16.0 inches (15.2 x 11.9 x 40.6 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 12 lb. (5.5 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit. It fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981654265,"sku":"FTD-102305","price":1252.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102305XL.jpg?v=1782536888"},{"product_id":"newmar-32-12-50-dc-converter-32-12-50","title":"Newmar 32-12-50 DC Converter [32-12-50]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e32-12-50 DC Converter\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating\u003c\/li\u003e\n\u003cli\u003eThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components\u003c\/li\u003e\n\u003cli\u003ePolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNumerous Converter and Load Protection Circuits:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCurrent limiting\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic thermal shutdown\u003c\/li\u003e\n\u003cli\u003eShort circuit proof\u003c\/li\u003e\n\u003cli\u003eReverse polarity\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection\u003c\/li\u003e\n\u003cli\u003eCarries CE mark\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage: 20-50\u003c\/li\u003e\n\u003cli\u003eOutput Voltage: 13.6\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Intermittent): 50\u003c\/li\u003e\n\u003cli\u003eOutput Amps (Continuous): 40\u003c\/li\u003e\n\u003cli\u003eCase Size (H x W x D): 6.2 x 6.8 x 18.1 inches (15.7 x 17.3 x 46.0 centimeters)\u003c\/li\u003e\n\u003cli\u003eWeight: 16 lb. (7.3 kg)\u003c\/li\u003e\n\u003cli\u003eOutput: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)\u003c\/li\u003e\n\u003cli\u003eRipple: 150 mV P-P maximum\u003c\/li\u003e\n\u003cli\u003eRegulation: 1% Line\/Load\u003c\/li\u003e\n\u003cli\u003eSwitching Frequency: 40 kHz\u003c\/li\u003e\n\u003cli\u003eEfficiency: 85% – Typical.\u003c\/li\u003e\n\u003cli\u003eIsolation: Output\/Chassis; Input\/chassis: 250 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDuty Cycle Ratings*:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.\u003c\/li\u003e\n\u003cli\u003eContinuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time\u003c\/li\u003e\n\u003cli\u003eIdle Current: Less than 100 mA (including power “ON” light)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOperating Temp Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.\u003c\/li\u003e\n\u003cli\u003eThermal shutdown @ 70 degrees C Case Temperature\u003c\/li\u003e\n\u003cli\u003eModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePowder-coated aluminum heat sink case\u003c\/li\u003e\n\u003cli\u003eFront panel terminal block\u003c\/li\u003e\n\u003cli\u003eHeavy-duty mounting flange\u003c\/li\u003e\n\u003cli\u003eConformal coated PC board\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)\u003c\/li\u003e\n\u003cli\u003eExtreme vibration mounting kit. (Information below)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOption: Extreme Vibration Mounting Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Extreme Vibration Mounting Kit is available to protect Newmar power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit. It fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for 16–7 lbs.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Newmar Power","offers":[{"title":"Default Title","offer_id":48599981687033,"sku":"FTD-102306","price":1309.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/102306XL.jpg?v=1782536889"}],"url":"https:\/\/www.fishtechdirect.com\/collections\/newmar-power-dc-to-dc-converters.oembed","provider":"Fish Tech Direct","version":"1.0","type":"link"}