{"title":"Digital Yacht Accessories","description":"Created by FishTech Builder","products":[{"product_id":"digital-yacht-seatalk1-to-usb-interface-zdigstnusb","title":"Digital Yacht SeaTalk1 to USB Interface [ZDIGSTNUSB]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeaTalk1 to USB Interface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDigital Yacht's SeaTalk to NMEA (ISO) Converter is a small, but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA 0183 network or device. Taking its power from the SeaTalk network, the ST-NMEA Converter features a full, multi-transistor SeaTalk 1 interface, an opto-isolated NMEA 0183 input and differential NMEA 0183 output that allows key navigational data to be reliably shared between the SeaTalk and NMEA0183 networks.\u003c\/p\u003e\u003cp\u003eFor developers and advanced users that want to access the raw SeaTalk data, the ST-NMEA converter can also be configured to work in a special “raw data\" mode ($STALK) which is gaining support in some Open Source projects.\u003c\/p\u003e\u003cp\u003eThe ST-NMEA (ISO) Converter is ideal for connection to one of Digital Yacht's wireless NMEA servers, allowing SeaTalk owners to go wireless and aUSB Version of the ST-NMEA Converteris also available for direct connection to a PC, Mac or even a Raspberry Pie embedded Linux system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConverts SeaTalk1 to NMEA data\u003c\/li\u003e\n\u003cli\u003ePowerful bi-directional converter –also converts NMEA to SeaTalk for use with 3rdparty transducers and sensors\u003c\/li\u003e\n\u003cli\u003ePowered from the SeaTalk network –easy red, black and yellow wire colour coding\u003c\/li\u003e\n\u003cli\u003eFeatures reliable multi-stage transistor SeaTalk interface\u003c\/li\u003e\n\u003cli\u003eOpto-isolated NMEA0183 input and differential NMEA0183 output\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003cli\u003eUSB version (for PC \u0026amp; MAC) also available\u003c\/li\u003e\n\u003cli\u003eUSB variant can also be configured to operate in “Raw Data” mode ($STALK)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-empty=\"true\"\u003e\u003cstrong\u003eUSB Version - Typical Connections:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnects direct to SeaTalk1 cabling using familiar red, black and yellow wiring\u003c\/li\u003e\n\u003cli\u003eSimple plug in USB connection for PC. MAC and Linux\u003c\/li\u003e\n\u003cli\u003eAlso supports raw data mode for developers\u003c\/li\u003e\n\u003cli\u003eIdeal for use with nav programs\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48596877279481,"sku":"FTD-70364","price":244.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/70364XL.jpg?v=1782511607"},{"product_id":"digital-yacht-ikonvert-w-usb-interface-zdigikvtusb","title":"Digital Yacht iKonvert w\/USB Interface [ZDIGIKVTUSB]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eiKonvert with USB Interface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe iKonvert NMEA2000-0183 Gateway\/Converter is an intelligent and flexible gateway for allowing software applications to read\/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.\u003c\/p\u003e\u003cp\u003eEvery popular Marine Navigation application that runs on PC\/MAC\/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.\u003c\/p\u003e\u003cp\u003eFor developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its “RAW Mode” where data can be read\/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.\u003c\/p\u003e\u003cp\u003eDigital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male).  Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in “RAW mode” and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.\u003c\/p\u003e\u003cp\u003eiKonvert’s USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows\/Mac\/LINUX\/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSmall but powerful bi-directional NMEA2000 Gateway\/Converter\u003c\/li\u003e\n\u003cli\u003ePowered from the NMEA2000 network\u003c\/li\u003e\n\u003cli\u003eHigh Speed USB 2.0 USB Interface (FTDI)\u003c\/li\u003e\n\u003cli\u003eCompatible with Windows, OSX, LINUX and Android\u003c\/li\u003e\n\u003cli\u003eCan be configured to operate in “Raw Mode” (Binary PGN data)\u003c\/li\u003e\n\u003cli\u003eConverts all of the key navigational data\u003c\/li\u003e\n\u003cli\u003eIntegral USB (Type A) and NMEA2000 Micro (Male) cables\u003c\/li\u003e\n\u003cli\u003eSimple configuration of data modes using DIP switches\u003c\/li\u003e\n\u003cli\u003eFull galvanic isolation\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48597116813561,"sku":"FTD-79012","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/79012XL.jpg?v=1782517762"},{"product_id":"digital-yacht-gps160-trinav-sensor-w-usb-output-zdiggps160usb","title":"Digital Yacht GPS160 TriNav Sensor w\/USB Output [ZDIGGPS160USB]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGPS160 TriNav Sensor with USB Output\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.\u003c\/p\u003e\u003cp\u003eTriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.\u003c\/p\u003e\u003cp\u003eThe GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.\u003c\/p\u003e\u003cp\u003eGalileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonassand Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eAvailable in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants\u003c\/li\u003e\n\u003cli\u003eGPS160USB also available with USB connection for PC\/MAC\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information –user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Antennas\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 4\"H x 7\"W x 10\"L WT: 1 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 703791696048\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/79871BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48597132640505,"sku":"FTD-79871","price":266.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/79871XL.jpg?v=1782518574"},{"product_id":"digital-yacht-gps160-trinav-sensor-w-seatalk-interface-bundle-zdiggps160st","title":"Digital Yacht GPS160 TriNav Sensor w\/SeaTalk Interface Bundle [ZDIGGPS160ST]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGPS160 TriNav Sensor with SeaTalk Interface Bundle\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.\u003c\/p\u003e\u003cp\u003eTriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etc\u003c\/p\u003e\u003cp\u003eThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.\u003c\/p\u003e\u003cp\u003eThe GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.\u003c\/p\u003e\u003cp\u003eThe GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.\u003c\/p\u003e\u003cp\u003eGalileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e72 channel GPS, Glonass and Galileo GNSS positioning receiver\u003c\/li\u003e\n\u003cli\u003eTypically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy\u003c\/li\u003e\n\u003cli\u003eCan be configured as dedicated GPS, Glonass or Galileo only device\u003c\/li\u003e\n\u003cli\u003eSophisticated anti-spoofing algorithm for robust positioning performance and interference rejection\u003c\/li\u003e\n\u003cli\u003eAvailable in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants\u003c\/li\u003e\n\u003cli\u003eGPS160USB also available with USB connection for PC\/MAC\u003c\/li\u003e\n\u003cli\u003eUser\/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches\u003c\/li\u003e\n\u003cli\u003eMultiple formats of NMEA data output including datum information –user configurable through internal DIP switches\u003c\/li\u003e\n\u003cli\u003eUp to 18Hz update rate (user selectable)\u003c\/li\u003e\n\u003cli\u003eUltra low (\u0026lt;20mA) power consumption at 12V DC\u003c\/li\u003e\n\u003cli\u003eInput for MOB switch\/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter\u003c\/li\u003e\n\u003cli\u003eProfessional system (ECDIS) support with datum sentence structure (DTM\/GBS\/GNS\/GRS\/GSA\/GST)\u003c\/li\u003e\n\u003cli\u003ePuck installation or fits 3rd party industry standard 1” x 14TPI threaded mount\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/79873BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48597132706041,"sku":"FTD-79873","price":368.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/79873XL.jpg?v=1782518574"},{"product_id":"digital-yacht-wnd100-mast-head-unit-20m-cable-zdigwnd100","title":"Digital Yacht WND100 Mast Head Unit  20M Cable [ZDIGWND100]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWND100 Mast Head Unit \u0026amp; 20M Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWind Transducers have a tough life, experiencing extreme weather, constant movement and the occassional seagull, so it is no surprise that they can often fail. With this in mind, the WND100 wind sensor features an ultra tough design with UV and salt resistant plastics, Igildur™ bearings for exceptional life and corrosion resistance. Data transmission is via a super-thin 20m digital cable providing fast update NMEA0183 data for maximum compatibility with legacy instrument systems and multi-function displays.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra tough Mast Head Unit\u003c\/li\u003e\n\u003cli\u003eIgildur™ bearings for exceptional life and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eUV, Salt water and high impact resistant plastics\u003c\/li\u003e\n\u003cli\u003e12\/24v DC operation with minimal power consumption\u003c\/li\u003e\n\u003cli\u003eSuper thin 20m Mast Head cable\u003c\/li\u003e\n\u003cli\u003eIndustry standard NMEA0183 Output for maximum compatibility\u003c\/li\u003e\n\u003cli\u003eOutput at 5Hz (configurable)\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48597152465145,"sku":"FTD-81044","price":469.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/81044XL.jpg?v=1782519532"},{"product_id":"digital-yacht-wln30-smart-wireless-nmea-multiplexer-zdigwln30sm","title":"Digital Yacht WLN30 Smart Wireless NMEA Multiplexer [ZDIGWLN30SM]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWLN30 Smart Wireless NMEA Multiplexer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e“The WLN30 is a smart NMEA to WiFi Multiplexer designed to connect your smart phone and other wireless devices to your boat’s navigation systems. It features three NMEA0183 inputs and easy web interface configuration.” \u003c\/p\u003e\u003cp\u003eDigital Yacht’s WLN30 Smart Wireless NMEA Mutiplexer takes iPad and tablet integration afloat even further with the ability to connect to existing on board GPS, AIS and instrument systems and transfer data wirelessly to an iPad or tablet – allowing compatible apps to display and compute with real time information. The WLN30 creates a secure, password protected wifi network on board to footprint the boat with data.\u003c\/p\u003e\u003cp\u003eWhen connected to, for example, an AIS system, real time AIS target positions and identity data will be displayed on detailed electronic charting through compatible apps including Weather4D, TimeZero, iAIS, iSailor, SailGrib, Seapilot and hundreds more. The tablet becomes a full function navigation display.\u003c\/p\u003e\u003cp\u003eThe WLN30 has three NMEA0183 Inputs and one NMEA0183 Output, which can be programmed through its simple browser interface to operate at 4800 or 38400 baud rates. Data received on the three inputs is multiplexed together and transmitted to any wireless devices connected to the WLN30’s wireless network. The same multiplexed data is also available on the NMEA 0183 Output or in an alternative mode the NMEA 0183 Output can be configured to forward data from the wireless application, such as next waypoint or autopilot data, to other NMEA 0183 equipment.\u003c\/p\u003e\u003cp\u003eAll configuration of the WLN30 can be done through its own simple web interface, just open your web browser, enter the WLN30’s IP address and you can set baud rates, multiplexing mode, network name, password and select AP mode.  No complicated programming software or app required and you can even view the received NMEA data in the web browser, for easy fault finding of issues.\u003c\/p\u003e\u003cp\u003eThe WLN30 supports TCP and UDP network protocols for maximum compatibility with apps. If you want to have full bi-directional control of an autopilot, with guaranteed data integrity or you want to be the only person receiving the data, then select TCP. If however, you want to receive the same data on multiple devices, for instance a PC at the chart table and an iPad on deck, then select the UDP broadcast protocol.\u003c\/p\u003e\u003cp\u003eWith its three NMEA0183 inputs, you can also utilise our SeaTalk to NMEA adaptor to allow SeaTalk instrument data to be interfaced directly to the WLN30 or our iKonvert gateway to connect NMEA 2000 data. Now works with the popular Navionics Boating App for Apple iOS and Android to display GPS and AIS data on your Navionics charts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree input NMEA 0183 to WiFi Multiplexer (4800 baud or 38400 baud)\u003c\/li\u003e\n\u003cli\u003eMultiplexed data transmitted over Wi-Fi and NMEA 0183 Output\u003c\/li\u003e\n\u003cli\u003eWeb interface for setup and initial programming\u003c\/li\u003e\n\u003cli\u003eSet baud rates, SSID and password through web interface\u003c\/li\u003e\n\u003cli\u003eSupports both TCP and UDP (for multiple connections) protocols\u003c\/li\u003e\n\u003cli\u003eView received NMEA data in web browser for easy fault finding of issues\u003c\/li\u003e\n\u003cli\u003eSupports a bi directional Wi-Fi interface for autopilot control\u003c\/li\u003e\n\u003cli\u003eFully compatible with popular navigation apps and software\u003c\/li\u003e\n\u003cli\u003eEasy to install IPX4 black box solution\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48597188149497,"sku":"FTD-83678","price":285.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/83678XL.jpg?v=1782520989"},{"product_id":"digital-yacht-pilotlink2-class-a-pilot-plug-wifi-interface-zdigplink2","title":"Digital Yacht PilotLINK2 Class A Pilot Plug WiFi Interface [ZDIGPLINK2]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePilotLINK2 Class A Pilot Plug WiFi Interface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThere are well over 100,000 Class A AIS systems installed on vessels globally. While the latest Class A AIS transponders (like the Digital DeepSea CLA2000) already have a wireless interface incorporated for iPad and tablet connectivity, many systems just use a standardized “Pilot Plug” wired interface. This Amphenol standard multi-pin design allows NMEA AIS and GPS data to be accessed from the transponder and pilots and delivery captains would use a simple USB interface cable for their personal PC-based ECDIS system. However, more and more captains now choose to use an iPad or tablet so need wireless connectivity.\u003c\/p\u003e\u003cp\u003ePilotLINK2 allows these Class A transponders to interface with the latest range of mobile devices including iPhones, tablets, and PCs\/MACs. Applications range from maritime pilots to survey ship charter users who may want access to the ship’s AIS and GPS data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnects to any standard “Pilot Plug” connector\u003c\/li\u003e\n\u003cli\u003eUSB powered for easy portability power from any USB source, adaptor, or power pack\u003c\/li\u003e\n\u003cli\u003eCreates secure password protected wifi network\u003c\/li\u003e\n\u003cli\u003eCan also join another wifi network if preferred\u003c\/li\u003e\n\u003cli\u003eEasy web interface with useful diagnostics display and Class A static, dynamic, and voyage data displays\u003c\/li\u003e\n\u003cli\u003eWorks with 100’s apps iSailor, Navionics, iNAVx, NavLINK, TZ iBoat, Imray, NV Charts, AquaMaps, Weather 4D, etc\u003c\/li\u003e\n\u003cli\u003eTCP\/IP and UDP protocols supported\u003c\/li\u003e\n\u003cli\u003eThe raw data log function\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSet up of PilotLINK is simple using any web browser on the connected device. View data, set up wireless passwords or join another wireless network and also view Class A AIS status. Your favourite apps connect using TCP\/IP or UDP protocols.\u003c\/p\u003e\u003cp\u003eThe data monitor shows a list of raw NMEA data. You can also log this data for analysis if required.\u003c\/p\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/97539BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48597486207225,"sku":"FTD-97539","price":313.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/97539XL.jpg?v=1782531738"},{"product_id":"digital-yacht-vekonvert-nmea-2000-gateway-zdigvekvt","title":"Digital Yacht veKonvert NMEA 2000 Gateway [ZDIGVEKVT]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eveKonvert NMEA 2000 Gateway\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eveKonvert brings NMEA 2000 connectivity to Victron’s popular SmartShunt battery monitoring system. Now a navigation multi-function display becomes a sophisticated battery and energy management system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eveKonvert is a stand-alone NMEA 2000 interface designed in conjunction with Victron Energy to integrate VE.Direct compatible devices such as their SmartShunt, BMV Battery Monitors, and MPPT Solar Charge Controller range into NMEA 2000 systems.\u003c\/p\u003e\u003cp\u003eThis functionality already existed but required the use of a sophisticated Cerbo module. veKonvert is a lower-cost, simpler solution for smaller installations that just need the electrical data displayed on a multi-function display.\u003c\/p\u003e\u003cp\u003eBoaters and boat builders like a clear and uncluttered dash or nav area, so integrating electrical data into the main navigation display is a popular and cost-saving option.\u003c\/p\u003e\u003cp\u003eThe product is a collaboration between Victron Energy and Digital Yacht. The system utilizes Victron’s proprietary VE.Direct data connectivity as a source for the NMEA 2000 data.\u003c\/p\u003e\u003cp\u003eVictron solar charge controllers (MPPTs) and battery monitors can now also interconnect to your NMEA 2000 MFD via the veKonvert interface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eInstallation is simple – just \"T\" into the NMEA 2000 backbone and plug into the VE.Direct custom connector on the SmartShunt, and you've got battery and electrical data on your NMEA 2000 network!  Note that one veKonvert is required for each battery bank.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUniversal NMEA 2000 gateway for Victron products with a VE.Direct interface\u003c\/li\u003e\n\u003cli\u003eEnables battery management or solar charge monitoring on compatible multi-function displays (Raymarine, Garmin, Navico, Furuno, etc)\u003c\/li\u003e\n\u003cli\u003eProvides battery voltage, charge\/discharge current, state of charge, and time to depletion based on a sophisticated algorithm\u003c\/li\u003e\n\u003cli\u003eEasy installation, plug ‘n’ play connectivity, and self-powering from the NMEA 2000 bus\u003c\/li\u003e\n\u003cli\u003eGenerates NMEA 2000 alerts from any BMV or SmartShunt Alarms\u003c\/li\u003e\n\u003cli\u003eSupports multiple SmartShunts for a larger multi-battery system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eVeKonvert Is Compatible with the Following Victron Products:\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eBMV-700, BMV-702, BMV-700H, BMV-712 Smart, BMV-710H Smart, BMV-712 Smart, SmartShunt 500A\/50mV, SmartShunt 1000A\/50mV, SmartShunt 2000A\/50mV, and All MPPT Charge Controllers\u003c\/p\u003e\u003cp\u003eThe veKonvert will automatically detect what Victron device it is connected to and adjust the NMEA 2000 data that it outputs accordingly. Below is a list of the PGNs that the veKonvert outputs for the different Victron Devices and different modes that they can operate in:  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAll MPPTs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cul\u003e\u003cul\u003e\n\u003cli\u003ePGN 127506 DC Detailed Status (DC Type set to MPPT)\u003c\/li\u003e\n\u003cli\u003ePGN 127508 Battery Status (MPPT Output Voltage and Current)\u003c\/li\u003e\n\u003cli\u003ePGN 130900 Proprietary Solar Controller (All solar panel data)\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/ul\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAll SmartShunts and BMVs\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePGN 127506 DC Detailed Status (DC Type set to Battery, SOC and A\/h consumed)\u003c\/li\u003e\n\u003cli\u003ePGN 127508 Battery Status (Output Voltage and Current)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e veKonvert is not compatible with Victron Chargers and Inverters. It should also not be plugged into the VE.Direct interfaces of any Victron \"Consumers\" such as Multiplus, Quattro, Cerbo, etc.\u003c\/p\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48599948230905,"sku":"FTD-100614","price":239.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/100614XL.jpg?v=1782535306"},{"product_id":"digital-yacht-lanlink-nmea-0183-to-ethernet-gateway-zdiglanlink","title":"Digital Yacht LANLink NMEA 0183 To Ethernet Gateway [ZDIGLANLINK]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLANLink NMEA 0183 To Ethernet Gateway\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.\u003c\/p\u003e\u003cp\u003eLANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP\/Port information.\u003c\/p\u003e\u003cp\u003eIt can support multiple TCP\/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5\/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNMEA 0183 to ethernet gateway version\u003c\/li\u003e\n\u003cli\u003e12\/24v DC low power operation\u003c\/li\u003e\n\u003cli\u003eConnects to router or devices via simple RJ45 Cat 5\/6 patch cable connection\u003c\/li\u003e\n\u003cli\u003eThe web user interface for easy setup from the connected device via the browser\u003c\/li\u003e\n\u003cli\u003eTCP\/IP or UDP connection modes –support for up to 5 connected devices with TCP\/IP\u003c\/li\u003e\n\u003cli\u003eBi-Directional\u003c\/li\u003e\n\u003cli\u003eThe NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS\u003c\/li\u003e\n\u003cli\u003eRS232 port for PC apps too\u003c\/li\u003e\n\u003cli\u003eStatus indicators for power, data in-out, network link, and server status\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSet-Up:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup\u003c\/li\u003e\n\u003cli\u003eConfigure NMEA data for 4800 or 38400 baud and set mode (TCP\/IP or UDP) and port\u003c\/li\u003e\n\u003cli\u003eSet up with fixed or dynamic IP address\u003c\/li\u003e\n\u003cli\u003eStatus page for system diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower: 10-35V DC (Consumption approx. 50mA at 12V DC)\u003c\/li\u003e\n\u003cli\u003eNetwork Port: Ethernet RJ45 10\/100MB\u003c\/li\u003e\n\u003cli\u003eIP Mode: Static or DHCP\u003c\/li\u003e\n\u003cli\u003eOperating Mode *TCP\/IP or UDP; Support for up to 5 connected devices in TCP\/IP mode; *Recommended mode of operation\u003c\/li\u003e\n\u003cli\u003eNMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 option via iKonvertgateway\u003c\/li\u003e\n\u003cli\u003eOperating temp: -25 to +70 degrees C\u003c\/li\u003e\n\u003cli\u003eLED Indicators: Power -Status -Link -Data In -Data Out\u003c\/li\u003e\n\u003cli\u003eOptions: RS232 connectivity (non-concurrent with NMEA)\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H): 95mm x 86mm\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48600004559097,"sku":"FTD-103374","price":276.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/103374XL.jpg?v=1782538052"},{"product_id":"digital-yacht-lanlink-nmea-2000-to-ethernet-gateway-zdiglanln2k","title":"Digital Yacht LANLink NMEA 2000 To Ethernet Gateway [ZDIGLANLN2K]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLANLink NMEA 2000 To Ethernet Gateway\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.\u003c\/p\u003e\u003cp\u003eLANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP\/Port information.\u003c\/p\u003e\u003cp\u003eIt can support multiple TCP\/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5\/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.\u003c\/p\u003e\u003cp\u003e*This version ships with an iKonvertNMEA Certified gateway\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 to ethernet gateway version\u003c\/li\u003e\n\u003cli\u003eThe NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options)\u003c\/li\u003e\n\u003cli\u003e12\/24v DC low power operation\u003c\/li\u003e\n\u003cli\u003eConnects to router or devices via simple RJ45 Cat 5\/6 patch cable connection\u003c\/li\u003e\n\u003cli\u003eWeb user interface for easy setup from the connected device via browser\u003c\/li\u003e\n\u003cli\u003eTCP\/IP or UDP connection modes –support for up to 5 connected devices with TCP\/IP\u003c\/li\u003e\n\u003cli\u003eBi-Directional\u003c\/li\u003e\n\u003cli\u003eThe NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS\u003c\/li\u003e\n\u003cli\u003eRS232 port for PC apps too\u003c\/li\u003e\n\u003cli\u003eStatus indicators for power, data in-out, network link, and server status\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSet-Up:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup\u003c\/li\u003e\n\u003cli\u003eConfigure NMEA data for 4800 or 38400 baud and set mode (TCP\/IP or UDP) and port\u003c\/li\u003e\n\u003cli\u003eSet up with fixed or dynamic IP address\u003c\/li\u003e\n\u003cli\u003eStatus page for system diagnostics\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePower: 10-35V DC (Consumption approx. 50mA at 12V DC)\u003c\/li\u003e\n\u003cli\u003eNetwork Port: Ethernet RJ45 10\/100MB\u003c\/li\u003e\n\u003cli\u003eIP Mode: Static or DHCP\u003c\/li\u003e\n\u003cli\u003eOperating Mode *TCP\/IP or UDP; Support for up to 5 connected devices in TCP\/IP mode; *Recommended mode of operation\u003c\/li\u003e\n\u003cli\u003eNMEA Input: Configurable 4800 or 38400 baud (NMEA 0183)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 option via iKonvertgateway\u003c\/li\u003e\n\u003cli\u003eOperating temp: -25 to +70 degrees C\u003c\/li\u003e\n\u003cli\u003eLED Indicators: Power -Status -Link -Data In -Data Out\u003c\/li\u003e\n\u003cli\u003eOptions: RS232 connectivity (non-concurrent with NMEA)\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H): 95mm x 86mm\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/103375OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48600004591865,"sku":"FTD-103375","price":414.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/103375XL.jpg?v=1782538052"},{"product_id":"digital-yacht-ma800-gps-antenna-f-ais-transponders-x500-391","title":"Digital Yacht MA800 GPS Antenna f\/AIS Transponders [X500.391]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMA800 GPS Antenna for AIS Transponders\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe MA800 passive GPS Antenna for AIS transponder (P\/No. X500.391) is compatible with all current Digital Yacht AIS Transponders (AIT2000\/2500\/3000\/5000\/CLA1000\/CLA2000). It is therefore an ideal replacement antenna for many makes of GPS receivers and chart plotters.  You can also use it with the discontinued AIT250 and AIT1000. However, the physical size and shape are different from the original antenna.\u003c\/p\u003e\u003cp\u003eThe base can be removed for puck mounting or with the base fitted, it can be attached to any 1” mounting accessory (available separately) for pole, deck, bracket, and rail mounting.\u003c\/p\u003e\u003cp\u003eIt ships with a 33' cable terminated with a slim FME connector and FME-TNC adaptor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eBolt holes: 5\/16\" diameter, 3\" x 1-1\/2\" on center\u003c\/li\u003e\n\u003cli\u003eSpecial cable slot thus eliminating removal of most factory-installed connectors\u003c\/li\u003e\n\u003cli\u003eStandard 1 in-14 thread (male)\u003c\/li\u003e\n\u003cli\u003eStainless steel\u003c\/li\u003e\n\u003cli\u003eHeavy-duty construction\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAntenna Band: AIS\u003c\/li\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eType: Antennas\u003c\/li\u003e\n\u003cli\u003eBox Dimensions: 2\"H x 8\"W x 9\"L WT: 1.2 lbs\u003c\/li\u003e\n\u003cli\u003eUPC: 081159830373\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48600120197369,"sku":"FTD-105943","price":128.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/105943XL.jpg?v=1782540982"},{"product_id":"digital-yacht-ns8-network-switch-8-port-1gb-zdigns8","title":"Digital Yacht NS8 Network Switch - 8-Port, 1GB [ZDIGNS8]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNS8 Network Switch - 8-Port, 1GB\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDigital Yacht’s NS8 Network Switch is a rugged and reliable 8-port 10\/100\/1000 base-T network switch that is ideal for expanding a wired Ethernet network onboard a vessel.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eMore and more boats now have a wireless router fitted or utilize devices like our 4G Connect for internet connectivity. For optimum data transfer speed, a wired Ethernet connection still offers the fastest and most reliable network connection onboard a boat, and for Streaming TV, VOIP, Security Cameras, and other data-intensive services, we always recommend using a wired connection.\u003c\/p\u003e\u003cp\u003eOur NS8 Network Switch provides a simple and rugged solution to increasing the number of wired Ethernet connections on the vessel. Designed to operate from a DC supply, with dual redundancy power supply design, a DIN rail mount, and eight RJ45 10\/100\/1000 Ethernet ports, the NS8 allows you to reliably expand your boat’s Ethernet network.\u003c\/p\u003e\u003cp\u003eInstallation could not be easier, simply connect one of the NS8’s RJ45 sockets to a LAN socket on our 4GConnect or 4GXtream routers, using a normal network cable, and wire the NS8 directly to the boat’s 12v, 24v, or 48v DC supply. Our 4G router will continue to provide IP addresses to any device plugged into the NS8 (via DHCP), and you can immediately see the status of all the Ethernet connections by the flashing Yellow and Green LEDs on each of the NS8’s ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8 Port Network Switch\u003c\/li\u003e\n\u003cli\u003e12\/24\/48v DC low power operation\u003c\/li\u003e\n\u003cli\u003eDual redundancy power supply design\u003c\/li\u003e\n\u003cli\u003eConnects to router via RJ45 Cat 5\/6 network cable connection\u003c\/li\u003e\n\u003cli\u003eSupports 10\/100\/1000 Ethernet Gigabit base-T\u003c\/li\u003e\n\u003cli\u003eDIN Rail (IEC\/EN 60715 – 35 × 7.5mm) mounting bracket and 100mm rail included\u003c\/li\u003e\n\u003cli\u003eStatus indicators for power and network link status\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003e100mm rail\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/112012OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48600383619321,"sku":"FTD-112012","price":214.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/112012XL.jpg?v=1782548843"},{"product_id":"digital-yacht-ikreate-nmea-2000-simulator-w-usb-zdigikreate","title":"Digital Yacht iKreate NMEA 2000 Simulator w\/USB [ZDIGIKREATE]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eiKreate NMEA 2000 Simulator with USB\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eFor anyone involved in designing, manufacturing, or installing marine electronics, the ability to simulate or replay NMEA2000 data is a real advantage and can accelerate software development, demonstrate NMEA2000 devices, or help diagnose network issues.\u003c\/p\u003e\u003cp\u003eWith more and more modern boats having an NMEA2000 network at the heart of their navigation system, it is really important that you have the tools to investigate the devices and data on the network should things not work as planned.\u003c\/p\u003e\u003cp\u003eConsisting of an iKreate USB interface and an HTML5-based web app, the iKreate simulator can generate any number of NMEA2000 PGNs or replay saved log files of real-life network data from any NMEA2000 system, regardless of brand.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThis package includes iKreate to connect to the NMEA 2000 network and the simulator software to generate any number of NMEA2000 PGNs.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eJust like our NMEA2000 Display App, the iKreate Simulator takes a new approach and is the World’s first multi-platform, browser-based NMEA2000 Simulator App that will run on Windows, LINUX, Mac OS X, and Raspbian. There is no installation, and if you can save a file and find it again, then that is as complex as it gets with just a single HTML5 file to worry about (less than 0.5MB in size).\u003c\/p\u003e\u003cp\u003eYou need to use the app with a browser that supports the Web Serial API, which currently includes Chrome, Chromium, MS Edge, and Opera. We also plan to support Firefox going forward (with its WebSerial Extension), but this was not possible for the first release of the app.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli id=\"isPasted\"\u003eCreate individual NMEA 2000 PGNs from a drop-down list populated with the data you enter, or play back a NMEA 2000 log file captured by a Digital Yacht NMEA 2000 product, etc, from an on-board system\u003c\/li\u003e\n\u003cli\u003eMultiple PGN groups can be created and even saved for future use\u003c\/li\u003e\n\u003cli\u003eThe data variance function can synthesise changing values\u003c\/li\u003e\n\u003cli\u003eNo complicated software to install – just a simple file for Chrome, Edge, Opera or Chromium\u003c\/li\u003e\n\u003cli\u003eFunctions on PC, MAC, and Linux platforms – simple USB connection\u003c\/li\u003e\n\u003cli\u003eSet SRC address and instance\u003c\/li\u003e\n\u003cli\u003eIntegrated 0.8m NMEA 2000 and 0.8m USB cable\u003c\/li\u003e\n\u003cli\u003eAvailable with USB-C connector (USB-A option)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box?\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eiKreate USB Interface\u003c\/li\u003e\n\u003cli\u003eSoftware to download via link\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/112036OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003cstyle\u003e.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }\u003c\/style\u003e\u003cdiv class=\"embed-container\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/Rn5OZB7C7Kw\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48600384078073,"sku":"FTD-112036","price":303.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/112036XL.jpg?v=1782548845"},{"product_id":"digital-yacht-velink-victron-ble-to-nmea-2000-zdigvelink","title":"Digital Yacht veLink Victron BLE to NMEA 2000 [ZDIGVELINK]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eveLink Victron BLE to NMEA 2000\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe veLink complies with the NMEA 2000 standard and works with all NMEA 2000 certified equipment. It is also compatible with the Raymarine SeaTalkNG standard via an NMEA 2000 to SeaTalkNG connector adapter (Raymarine part number: A06045).\u003c\/p\u003e \u003c!--- cis2:m2lnm5xn ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/112038OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48600385650937,"sku":"FTD-112038","price":276.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/112038XL.jpg?v=1782549103"},{"product_id":"digital-yacht-environlink-nmea-2000-temperature-humidity-zdigenvlink","title":"Digital Yacht EnvironLINK NMEA 2000 Temperature\/Humidity [ZDIGENVLINK]","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEnvironLINK NMEA 2000 Temperature\/Humidity\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eAccurate and reliable weather information is essential for every boater.  While the internet provides a plethora of animated forecasts, there’s actually no substitute for localised pressure trend information from an instrument measuring, most importantly, air pressure, but also temperature and humidity information. Rapid changes in barometric pressure are a sure sign of impending weather changes, and as the expression goes, forewarned is forearmed!\u003c\/p\u003e\u003cp\u003eDigital Yacht’s EnviroLINK device brings traditional barometric pressure, temperature, and humidity monitoring to the digital age with NMEA 2000 connectivity for your multifunction display (MFD) as well as wireless smartphone and tablet connectivity. MFDs are offering more and more capabilities thanks to NMEA 2000 connectivity, so one display on the boat can become an information hub.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eEnviroLINK is also easy to install, taking power from the boat’s NMEA 2000 network and feeding data to displays. It just needs one simple cable connection. Most modern electronic multi function displays can display this data, but you can also utilise EnviroLINK’s wireless interface with a tablet or phone and display a 10 minute, 24 hour or 48 hour historical analysis.\u003c\/p\u003e\u003cp\u003eTrends in temperature and humidity are also recorded. Data is collected and stored locally using a precision sensor so there’s no internet connection needed and no proprietary apps require installing. EnviroLINK operates autonomously on your boat providing the best insight to local weather.\u003c\/p\u003e \u003c!--- cis2:m2lnm5xn ---\u003e","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":48600385683705,"sku":"FTD-112039","price":248.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0818\/5174\/4505\/files\/112039XL.jpg?v=1782549103"}],"url":"https:\/\/www.fishtechdirect.com\/collections\/digital-yacht-accessories.oembed","provider":"Fish Tech Direct","version":"1.0","type":"link"}